1995 Johnson 115 J115SXEO

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
I have the Johnson outboard mentioned above. I've changed the spark plugs and had the carbs rebuilt. My boat will not idle in neutral in the water. When I have it connected to the hose it will idle and move from forward and reverse without killing. But when it's put in the water I have to throttle it to start and can't get it to idle in neutral while in the water. It dies as soon as I bring it down to neutral? Did anyone experience this trouble or have some suggestions what could be the caused? As long as it's running throttle it'll run for forever and once I put it in motion it'll run like it didn't struggle to idle in neutral. Someone help please!
 

SkiDad

Lieutenant Commander
Joined
Jul 18, 2010
Messages
1,518
All you need to do is turn the idle up some. Usually around 750 when in gear. I'm not sure where the idle screw is on your engine but a Google search should show it. Another thing you could check is see that your spark plugs are not fouled. I usually wipe mine off every year.
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
Thank you for your response! I will search for the idle screw! Man, it's driving me insane...I just want to fish and have a dependable outboard.
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
What you are experiencing is perfectly normal, it will idle slower in the water than on muffs. People frequently adjust the idle on muffs and then it dies in the water, it's a simple adjustment.
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
So basically raise the idle up and that should take care of the problem? I was out fishing yesterday had to throttle it up to start shift in Neutral and hurry and shift it in gear to keep it running. I've had the boat since April did not have this problem, fished at least 8 or 9 times. But recently started having this problem. So that's when I had the carbs rebuilt and changed the Sparks.
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
If it changed, then a carb cleaning may be in order, but it still may just an adjustment issue.
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
Ondarvr....just had the carb kit installed last week. Fired up perfect on the hose. Took it out yesterday and had to throttle start every time I decided to move and come in.
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
I'm trying to locate my idle screws on the same outboard...can you point me in the direction?
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
Can i send someone some photos and of my outboard and you point me to the idle screw?
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
1995 Johnson 115 J115SXEO

Can someone point me in the directions of the idle screws? Boat run fine on muffs but in water it dies in neutral.
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,352
Boss,
Merged the 2 topics and moved it all to the Johnson forum, where it should have been.

Good luck getting your motor running right
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
I am having trouble understanding. These are easy fixes but need background. One at a time, as it appears there are two engines. Did you mess with the linkages, did you do carb kits, did it ever run well and you did something and now it does not? Also, model #'s for both.
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
I apologize for the confusion. It's only one outboard. 1995 Johnson 115 J115SXEO. I had this boat since April 2016. Fish about 10 weekends since. Boat started and ran fine. Just recently I've had problems starting. I've check the compression. All 120's. Put new sparks, notice a better get up. Had the carbs rebuilt, put them on the muff boat starts and runs good with the muffs. Took it out last Saturday, had to throttle start it every time and when I went down to neural it would kill if I didn't hurry and shift it in gear. Thanks!
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
No Title

The inner clicker thing will advance idle timing when in water in gear when everthing else is perfect. That last perfect part is important. If carbs, vst, throttle bodies are not perfect DO NOT MESS WITH THE LINKAGE. just my humble opinion.
 

Attachments

  • photo248562.jpg
    photo248562.jpg
    128.6 KB · Views: 0

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
Where did you find that photo? And is there and idle screw on my model? If so, could you point me to it?
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
I took that photo from a power head I have here in the shop.

Pretty sure its the same as yours. You loosen the little screw then click the inner clicker to the left. However, unless someone has moved it, or the motor has been mounted on a different boat or something this should not need to be changed. If it used to idle fine and does not now then there is another reason and simply increasing the idle is masking the real issue.

Please note that things like this can be tricky to determine over the net. At least for me, some of these guys on here are really really good.
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
I really think you probably need to clean the throttle bodies and the little passages. This is the unit behind the carbs. Also check that the VST is not leaking fuel from the gasket when squeezing the bulb. On that note, squeeze bulb till firm. Gently keep squeezing, are you able to further depress the bulb?
 

Boss54

Cadet
Thread starter
Joined
Jul 16, 2016
Messages
11
Yes, it is the same that's why I was wondering. That's why you have so much knowledge, you work on them. I really appreciate your incite and responding. I really want to bring it to the shop just so I could get it running like she was but its hard to trust those guys. They are all about $$$ and would lie to you just to make you spend more $$. That's why I'm would like to exhaust all my options and let that be a last resort.
 
Top