1995 48hp Evinrude outboard motor

ladysas

Recruit
Thread starter
Joined
Jul 30, 2016
Messages
3
My husband has been working on this motor all year, new fuel pump, exchanged carburetors, has 2, new plugs,
will run but will not rev up dies, and it misses, was wonder where the timing marks should be
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
Why were the carbs exchanged and what are the new carbs?

Do you still have the old ones?

Some background will help also.

Tell the whole story and someone can point you in the right direction.

We always start with a compression check, an open air gap spark check, and a fuel sample into a clear container.

Welcomd to iboats, with patience and testing and answers this can be solved
 

ladysas

Recruit
Thread starter
Joined
Jul 30, 2016
Messages
3
The carbs were off of an running eng and he put the old ones back on, the compression was 92 and 95 we havent tried the .... spark gap yet
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Since carbs were removed, a complete link & sync needs to be done. No - you can't do this without a service manual and no - nobody is going to type a many page process for you.
 
Top