FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Waverunner III started fine then next time absolutely nothing. Battery is up, lanyard attached etc. Looked at fuse looked good. Could it be the kill switch stuck or some such and how do I check for that?
there should be a plug under the hood from that switch,, I had one many years ago that did the same thing and I had to unplug it to get it back to the ramp from an island where it quit running
Waverunner III started fine then next time absolutely nothing. Battery is up, lanyard attached etc. Looked at fuse looked good. Could it be the kill switch stuck or some such and how do I check for that?
Check to make sure the connections at the battery are clean.If that doesnt work,put a known good battery in and try. You can take the start/stop switch off and clean the terminals inside as well. If you arent getting any click then it could be several things. The starter bendix may be engaged or starter is just bad.
