steve.carter
Cadet
Thread starter- Joined
- Jul 27, 2003
- Messages
- 6
I have recently bought a boat with twin outboard setup (J140TXATS) with VRO, both motors emit palls of white smoke when started.<br />Once warmed up, the smoke is still quite noticable but reduced. When underway and on the plane doing around 4000RPM the smoke is still noticable. <br />I completely replaced the lubricant on one motor with Yamaha TCW3, bled the lines etc, and noticed a reasonable reduction in smoke on that one, but it is still what most would call excessive smoke...<br />I have owned many Johnson V4 motors before (none previously with VRO) and have never seen so much polution!! <br />Is this commonplace with VRO on these motors? or is there a deeper problem requiring attention?