I have a 1993 evinrude E150GLETC it will run like a scalded dog when its right.
Right now is not one of those times. I put the boat (Ranger) in with out the plug in (stupid thing to do) it just filled up the back and it did not get on the motor or in the wiring. I started the motor to drain the boat it would only run about 2500 RPMs.It will start just fine and idle but when I put it in gear and open it up it will not run past 2500rpms It over heated once before and would only run slow.but that time I had an alarm.There is no alarm this time. I checked the water pump and it's good and I have good water pressure. I also pumped the fuel bulb while running to make sure it was geting gas that made no difference.
any help would be greatly appreciated.
Right now is not one of those times. I put the boat (Ranger) in with out the plug in (stupid thing to do) it just filled up the back and it did not get on the motor or in the wiring. I started the motor to drain the boat it would only run about 2500 RPMs.It will start just fine and idle but when I put it in gear and open it up it will not run past 2500rpms It over heated once before and would only run slow.but that time I had an alarm.There is no alarm this time. I checked the water pump and it's good and I have good water pressure. I also pumped the fuel bulb while running to make sure it was geting gas that made no difference.
any help would be greatly appreciated.