1991 120HP Force Timing marks

CJ6243

Recruit
Joined
Mar 13, 2010
Messages
2
My flywheel doesnt have numbers. 1 lone mark TDC and 3 marks to the left of TDC mark. Out of the three marks which is 28 degrees? I'm assuming its the furthest one to the right out of the 3. Ive looked at some other timing posts but those have had numbers and the video I watched has numbers as well. Trying to set timing. Plugs removed and grounded, safety interlock bypassed... Thanks in advance.
 
Last edited:

pnwboat

Rear Admiral
Joined
Oct 8, 2007
Messages
4,251
Yes you are correct. If the flywheel normally turns clockwise when running, (looking down at the flywheel from above) looking at the 3 marks, the one to the very right is 28° BTDC.
 

CJ6243

Recruit
Joined
Mar 13, 2010
Messages
2
Yes you are correct. If the flywheel normally turns clockwise when running, (looking down at the flywheel from above) looking at the 3 marks, the one to the very right is 28° BTDC.
Thanks for the confirmation. As I said it's a 91 so the static timing would be 32? This motor has eaten my lunch.
 
Top