1990 Johnson 115 startor/solenoid

jeremyeasen

Seaman
Thread starter
Joined
Jun 20, 2002
Messages
72
Brand new battery, still starts slow. Shaft on starter spinds freely, motor is fine, not seized or low lubrication. With a multi-meter, what voltages should i see at the starter and at the solenoid, or will they be the same? If i read 11-13V or so, does that mean the starter is definitely bad, or are there other possibilities? thank you.
 

Solittle

Fleet Admiral
Joined
Apr 28, 2002
Messages
7,518
Re: 1990 Johnson 115 startor/solenoid

Most common problem is corrosion with the electrical connections causing a lot of electrical resistance. Clean all connections (battery too).
 
D

DJ

Guest
Re: 1990 Johnson 115 startor/solenoid

Montauk,<br /><br />Pay SPECIAL attention to the negative ground on the engine block. Looks can deceive you. Take it off and clean it.
 
Top