1990 90hp johnson

Taz21872

Recruit
Thread starter
Joined
Mar 5, 2018
Messages
5
Im trying very hard to do a waterpump on my 1990 90hp v4 johnson. I cannot get the shifter rod disconnected i pulled the lil spring pin not sure what to do i can only get lower unit to drop 2 inches
help please
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Pushed over and rotated a bit should release the shift rod.
 

Taz21872

Recruit
Thread starter
Joined
Mar 5, 2018
Messages
5
Its in reverse cause that is what i read somewhere so rotate it foward to neutral?
 

Taz21872

Recruit
Thread starter
Joined
Mar 5, 2018
Messages
5
I know you are probably busy i truly appreciate the help is there any other tricks or tidbits i should know? Do u put rtv on the lower unit when u put it back together?
again thank you for any input
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
I think the lower unit is now released.----Give it a good tug and it should drop.----RTV is not used on outboard motors !
 

Taz21872

Recruit
Thread starter
Joined
Mar 5, 2018
Messages
5
Thank you for your help we are up and pumping water and still shifts in and out of gear
 
Top