1990 50 HP Johnson tilt doesn't work, motor frozen down

Okie Catfisherman

Recruit
Thread starter
Joined
May 13, 2017
Messages
2
I believe I have a leak in my hydraulic tilt, when i bought the boat the seller pushed the tilt up and down and the tilt motor worked but the boat motor didnt budge, the tilt motor quickly stopped working as we tried to assist it in lifting the boat motor. The boat motor was stuck in its position so in order to raise it I turned the bypass screw and the boat motor went all the way down, but now seems to be locked down and i cannot raise it, it seems to "hit" something or be locked down by something. I've added a link to a youtube video explaining this as well. Any help would be appreciated in getting the boat motor out of this "locked down" position so i can raise it and trouble shoot everything. Thanks
 

Okie Catfisherman

Recruit
Thread starter
Joined
May 13, 2017
Messages
2
No, my motor doesnt have the plate with the model number, so i have taken down the serial number and have to email evinrude some pictures of the outboard to get it.
 

tloc1000

Petty Officer 3rd Class
Joined
Jun 12, 2017
Messages
81
i have a 1990 model that was locked down. I was able to raise it more than that where I could get to the nut on top of the cable (left side of the piston cylinder). I loosened that nut and was able to raise the motor the rest of the way.
 
Top