1989 Johnson water pressure connection to engine

thejeeper

Recruit
Thread starter
Joined
Jul 7, 2003
Messages
1
Hey out there. I have a 1989 Johnson 110. Runs like it should. I am a tech by trade (auto) so I am very capable of working on these lil' guys. Anyway- I have a water pressure guage that is not connected at the power head and I do not see where it would connect. i do see the actual hose coming off the guage- just sittin' there chillin' at the base of the power head. Any ideas on where this should be connected? Used to be in between the heads-- No clue here. Thanks!
 

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,994
Re: 1989 Johnson water pressure connection to engine

Look for a plug in the area of the thermostat housing. If you can't find one, you can cut a cooling hose and put a "T" fitting in.
 

Solittle

Fleet Admiral
Joined
Apr 28, 2002
Messages
7,518
Re: 1989 Johnson water pressure connection to engine

jeeper - trace all of the water lines that come from the telltale. One of them will go into a plastic 90 degree fitting at the lower right corner of (I think) the exhaust cover right near the lower left corner of the starboard head (mine is a 1987). Put a "t" fitting in & connect a hose to the guage.
 
Top