1989 force 125 hp tilt trim problem HELP

BRIAN BURR

Recruit
Joined
Oct 6, 2019
Messages
1
I have a 1989 force 125 horse power that had a badd valve body on the tilt trim I replaced the valve body and the motor now when I refilled it and took it out for a test ride under a load it blows the breaker it will go up-and-down no problem without the motor having a load on it when I say a load I mean the prop turning putting pressure on the motor any ideas
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
16,570
The new pump might be binding and making it tougher to move under load?

How did you refill the reservoir ? Motor up or down when filling?
Up? you might have over filled it and pushed oil up into the electric motor??

OR?? the breakers 30 years old and tired?

Using the WAG system, wild a%$ guess :)
 

puffitu

Petty Officer 1st Class
Joined
Dec 30, 2018
Messages
285
Ive been using the wag for years. Great system; not perfect but will eventually get you there lol
 

topgun3690

Petty Officer 2nd Class
Joined
May 7, 2019
Messages
184
Yes, sometimes the WAG is all you have to go on.....and can sometimes result in a little FUBAR. Lol :faint2:
 
Top