1989 Evinrude 48 SPL paint project...

SoTxFisher

Cadet
Thread starter
Joined
Jul 16, 2017
Messages
27
Just a project I was working on.... 1989 Evinrude 48 SPL.. had some bad paint issues... stripped most of the bad areas down, then sanded and sanded and sanded using different grits till smooth.. then a Krylon dark grey primer.. several coats, wet sanding in between... then the final several coats of Krylon Fusion in Silver Metallic.. came out better than I imagined.. not factory perfect.. but 1000x better than it was.. hopefully that paint stays on.. mainly the lower unit area.. we run in saltwater.. so we shall see in time...

Photos are not in any order I don't think.. but you can tell where I started, progressed and finally ended up... Evinrude marine decals are on the way!
 

Attachments

  • photo273205.jpg
    photo273205.jpg
    51.6 KB · Views: 1
  • photo273206.jpg
    photo273206.jpg
    55.7 KB · Views: 1
  • photo273207.jpg
    photo273207.jpg
    52.7 KB · Views: 1
  • photo273208.jpg
    photo273208.jpg
    58.6 KB · Views: 1
  • photo273209.jpg
    photo273209.jpg
    54.6 KB · Views: 1
  • photo273210.jpg
    photo273210.jpg
    171.9 KB · Views: 1
  • photo273211.jpg
    photo273211.jpg
    130.4 KB · Views: 1
  • photo273212.jpg
    photo273212.jpg
    130.8 KB · Views: 1
  • photo273213.jpg
    photo273213.jpg
    142.3 KB · Views: 1
  • 20525793_10204208193362472_6174350273185994222_n.jpg
    20525793_10204208193362472_6174350273185994222_n.jpg
    58.8 KB · Views: 1
Top