taylorpond1
Recruit
- Joined
- Jul 18, 2014
- Messages
- 3
I was out on the lake (luckily close to shore) and was in the back of the boat pulling a kid off the tube. The boat was idling and stalled. Usually no big deal but I went to restart it and nothing. just turnsover and over and will not catch. Tried using ether, and every other trick in the book and nothing. I have heard it may have something to do with some type of 'emergency switch that kicked on somwhere in the motor aka if the oil is low or the trim is too high. Possibly a malfunctioning cut off switch from the controls (which were just replaced) and could be bad wiring? Just wondering which direction to try first. Any suggestions would be much appriciated