1988 Johnson 30hp Spark Adv

candyman206

Cadet
Thread starter
Joined
Aug 18, 2015
Messages
23
hi, trying to get some ideas on fixing this. The pin in the spark adv lever pops off when too much tension is applied.
 

Attachments

  • photo284844.png
    photo284844.png
    1.4 MB · Views: 0

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
If you're saying that the "steel" pin that the spring is connected to actually pulls out of the "aluminum" vertical throttle lever, You'll need to replace that vertical lever Part #398026... superseded up to part #438075... OR... take that lever and pin to a machine shop. It's beyond the ability of the average boater or mechanic to do anything on a permanent basis otherwise.
 

candyman206

Cadet
Thread starter
Joined
Aug 18, 2015
Messages
23
took a look at it during the day and rigged something up. pulled the pin out and tapped the hole for a 12-24 bolt.
 
Top