good morning to all, i just joined this form a few days ago and i really need your help. i know this topic has been discussed before but i can not find a start to finish thread on how to do this or what parts is needed on this up grade. i purchased a 1988 laser ski boat with a 1988 evinrude 200 back in july 2015, got stranded on the water 4 out of the five times i gotten to take it out. learned the fuel cap was letting water in the fuel due to not being the original fuel cap. i got lucky and found one on ebay from a vintage dealer. then all my electronics caught fire so had to save up and i replaced the stator, power pack and voltage regulator. the guy i bought the boat from he had a electronic fuel pump, so i rebuilt the original fuel pump on the motor. was going to take it back out to test run it again. now i have a water leak from the control valve that is hooked to the throttle linkage. after researching that i find out you can no longer buy that part. so i find you can do an up grade to bypass the control valve. but can not find a thread from start to finish on what all is needed and how to do this upgrade. so please help me out, after all the repairs i have done i believe i will have a good boat and motor that will last me a long while.
thank you John
thank you John