1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

[Birdy]

Hi guys,
so i got a 1988 flightcraft 18xlt (outboard) on the cheap becuase it didn't have a floor in it. I have access to the same boat in working condition but sadly i cant just tear up the floor and see the layout of the stringers. If anyone has any pictures or experience with this type of boat please let me know!!!! I would love to get this boat up and running asap!

 

[Woodonglass]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

Uhhmmm, not sure what your question is???

 

[Birdy]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

Uhhmmm, not sure what your question is???

sorry haha. I need to know how the stringers were laid out and where all the supports where if possible.

 

[captmello]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

http://forums.iboats.com/boat-restoration-building-hull-repair/1989-australian-flightcraft-18xlt-deck-stringers-upholstery-resto-589741-2.html

 

[Birdy]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

http://forums.iboats.com/boat-restoration-building-hull-repair/1989-australian-flightcraft-18xlt-deck-stringers-upholstery-resto-589741-2.html

Sadly it doesnt show much about the bulk head or the layout of the stringers

 

[Woodonglass]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

Actually it does. The stringers are clearly shown and the front bulkhead location is also clearly shown and it's quite easily discerned how it should be fabricated. Not sure what your getting at when you speak of the layout. It seems to be quite clear to me.

 

[jigngrub]

Re: 1988 Australian Flightcraft 18XLT Deck and Stringers (outboard)

Posting pics of your boat will get you the best help and answers.