1986 Johnson 150 GT not starting

Tomboatguy

Recruit
Thread starter
Joined
Jul 21, 2016
Messages
1
Ok so when putting the boat on the trailer last night the trim stopped working. Loaded the boat and then it would not start. No noise, nothing. I checked the main fuse and had a blown small 20 amp fuse that when I replaced it the trim worked again but not the starting. I am sure it is a fuse somewhere but I dont have the engine manual and cant find any other fuses. Is there one in the gear box near where the key goes that could have blown? I am supposed to leave tomorrow for a weekend trip and I am supplying the boat! Any ideas or help would be great. I have read on other forums that there may be a square fuse by the starter as well?
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Your engine should have one small, cylindrical 20 amp fuse in the main wire harness under the cowling. That's the only fuse on the main engine harness. There is no additional fuse in the control box. I'd try to jump your starter direct with a set of automotive cables and a known strong battery.
 
Top