1985 mercury mariner flywheel torque spec

[Captmn]

Hi,
I am putting the flywheel back on my outboard after replacing the lighting coil. Does anyone know the torque spec?

1985 mercury mariner 2 stroke
Serial # 689 S 109546
Model 30E0

Thank you for your help

 

[carholme]

Re: 1985 mercury mariner flywheel torque spec

http://web.ebscohost.com/serrc/pdf?...b-a267-8e2b031ecd53@sessionmgr14&vid=4&hid=11

Gerry

 

[Captmn]

Re: 1985 mercury mariner flywheel torque spec

http://web.ebscohost.com/serrc/pdf?...b-a267-8e2b031ecd53@sessionmgr14&vid=4&hid=11

Gerry

Hi Gerry,
Thanks for the information, but the link isn't working. Error message "System Problem has occurred". Tried going to EBSCO Publishing directly but access is limited to institutions & corporations, not individuals.

- Steve

 

[carholme]

Re: 1985 mercury mariner flywheel torque spec

Steve;

The link is only valid for a short time:

http://web.ebscohost.com/serrc/pdf?...3-a0c5-b042f2f40d3a@sessionmgr11&vid=4&hid=15

If you don't get it the torque for the flywheel is 110-125 foot lbs. (149.6-170Nm).

Gerry

 

[Captmn]

Re: 1985 mercury mariner flywheel torque spec

Steve;

The link is only valid for a short time:

http://web.ebscohost.com/serrc/pdf?...3-a0c5-b042f2f40d3a@sessionmgr11&vid=4&hid=15

If you don't get it the torque for the flywheel is 110-125 foot lbs. (149.6-170Nm).

Gerry

Thanks again Gerry for your help
Steve