1985 Johnson 35

Bam72

Recruit
Thread starter
Joined
Jul 17, 2018
Messages
2
Going by the model number it looks like I have a 1985 Johnson 35. Runs great at idle but terrible when you start to give it throttle. I’m thinking the high speed jet is dirty. When I look at parts breakdowns the carb does not look exactly the same. I’m pretty sure it it OEM. My carb has a brass vertical tube that runs ut the middle. It has holes drilled into the sides of the tube. Ther is also a smaller tube inside the larger. The parts breakdowns don’t show this. Anyone have any ideas.
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
You sure it's an 85? There was no 35hp in 1985.

Could be dirty carb, could be other fuel problems, fuel pump, filter, clogged up lines, tank. Could also be fowled plugs, weak spark, sync between carb and spark could be off. What are the compression numbers?
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Does the piece you are talking about looks something like this? If so then they are not always removable/replaceable so they do not have a part number. Therefore they are not shown in the parts diagrams as they are part of the carb body. The one in the photo has threads for removal but I think many do not. EDIT You said going by the model number it looks like 1985.. What is the model number?
 

Attachments

  • photo296053.jpg
    photo296053.jpg
    4.8 KB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The high speed jet is screwed horizontally into the FLOAT BOWL.-----Do not modify the wee tube inside the main nozzle.
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
I have a Carb from a 1972 25hp Johnson soaking in acetone right now and there is clearly no threads in the FLOAT BOWL. And the nozzle is still attached to upper part of the carb. And if you look up that carb diagram you will see the nozzle does not have a part number. Now my 1976 40hp clearly shows the nozzles threaded into the FLOAT BOWL. The photo I put up was just for reference.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The high speed jet is screwed horizontally into the floater bowl on a 1985 model 35 hp Johnson.
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Okay I was only able to find a diagram for a 1984 and a 1986 35 hp and there was not a nozzle that was screwed into the float bowl. It seems there was a 35hp made in 1985 but I was not able find a diagram. So maybe they changed the nozzle for just that one year that seems to be a quite rare model????????
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Looking at diagrams from 1976 into the 90s there is not one carb on a 35hp johnson with the nozzle screwed into the FLOAT BOWL. So that makes your 1985 with the nozzle screwed into the FLOAT BOWL even more rare. ????????
 

Bam72

Recruit
Thread starter
Joined
Jul 17, 2018
Messages
2
The photo supplied by hardwater fisherman looks like what I have. The engine model is j35elcts. On iBoats.com that said it was a 1985. The engine has new plugs and several weeks ago I rebuilt the fuel pump to see if it would help. It ran the same. As of yesterday it’s gone down hill. Can’t run above idle without stalling. I disassembled the carb and cleaned it as best I could with no change. You should know it is on a remote lake in Canada where access to my regular tools is impossible so I’m working with what I have.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The nozzle is in the carburetor body.----The high speed jet is screwed into the FLOATER BOWL , found way inside there after taking out the drain plug !
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Okay sorry. He was asking why he could not find the nozzle on the parts diagram. And I thought you were talking about the nozzle and not the high speed jet. Again I should of read more closely before commenting.
 
Top