1984 Evinrude ignition problem

blackboat

Recruit
Thread starter
Joined
Dec 31, 2017
Messages
3
My 1984 Evinrude does'nt have a stator ,it has a charge coil a sensor and two coils and a power pack.
My question is what could cause the rubber sealant to melt out of coils,charge coil and sensor besides running hot
 

Stumpalump

Chief Petty Officer
Joined
Dec 5, 2013
Messages
413
They biodegrade and breakdown or they get corrosion inside and crack. Don't buy NOS parts. Buy new factory or aftermarket like Sierra. Iboats has all that stuff and ships fast.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Is it running hot ?---Has water pump been serviced , yes or no ?
 

blackboat

Recruit
Thread starter
Joined
Dec 31, 2017
Messages
3
The parts are the original , after talking to a Evinrude dealer they said this commom with these parts being this old and like I said from the beginning it is not running HOT
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Take the dealers's opinion to heart.-------Just replace all that old junk then.
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
A bad rectifier will do it also....cause the stator to overheat.
 
Top