CumminsDriver
Cadet
- Joined
- Nov 25, 2012
- Messages
- 24
Hey guys I got my 22ft Aquasport Center console 222 CCP A nice boat for sure, only
problem is the engine. I cleaned the carburetors out recently and put new plugs in the
engine cranks right up no problem sounds like it's ready for the ocean I hit the key
and I don't have to hold it just turn it for a 1/8 of a second when warmed up it sounds
perfectly sound.. But I did compression test on all cylinders and all were right around
80-85lbs except for the top right cylinder its a 235 V6 Johnson pretty sure its the Crossflow
not looper. I tried letting sea foam sit in for a few hours dumped it in the cyl with low compression and
cranked it up nothing happened it just smoked like hell! I only did a dry compression test no wet test and
I tried another time when it was warmed up its right at 75lbs maybe 76 and its the top right cylinder is
this maybe a problem that's happened to others before?.. I was just curious if there
was anything I should try to do or buy some chemicals to put in there before I pull the head off. I
appreciate you guys taking the time to help me out thank you!!!
Also When I rev this engine up on the muffs it sounds great revs right up nice and loud
And my compression tester is good snap on one I have 2 for that reason
problem is the engine. I cleaned the carburetors out recently and put new plugs in the
engine cranks right up no problem sounds like it's ready for the ocean I hit the key
and I don't have to hold it just turn it for a 1/8 of a second when warmed up it sounds
perfectly sound.. But I did compression test on all cylinders and all were right around
80-85lbs except for the top right cylinder its a 235 V6 Johnson pretty sure its the Crossflow
not looper. I tried letting sea foam sit in for a few hours dumped it in the cyl with low compression and
cranked it up nothing happened it just smoked like hell! I only did a dry compression test no wet test and
I tried another time when it was warmed up its right at 75lbs maybe 76 and its the top right cylinder is
this maybe a problem that's happened to others before?.. I was just curious if there
was anything I should try to do or buy some chemicals to put in there before I pull the head off. I
appreciate you guys taking the time to help me out thank you!!!
Also When I rev this engine up on the muffs it sounds great revs right up nice and loud
And my compression tester is good snap on one I have 2 for that reason