1983 johnson 70 hp VRO issues

redslayer1121

Cadet
Thread starter
Joined
Mar 28, 2016
Messages
12
My VRO system has been eliminated, however the plastic piece on the bottom at the fuel inlet has split in half and spraying fuel everywhere. I was recently running the boat and out of nowhere it just bogged down to almost an idle even at WOT and then finally when I go it home the motor wouldn't even crank over. Could this be the issue causing it and it is possible to just replace the inlet rather than the entire pump.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
???---1983 models did not come with VRO on them.----Any pictures ?
 

redslayer1121

Cadet
Thread starter
Joined
Mar 28, 2016
Messages
12
I don't have any pictures at the moment, I can get some later. It could possible be a later model, it does have the VRO system.
 

redslayer1121

Cadet
Thread starter
Joined
Mar 28, 2016
Messages
12
The part circled is the part that has a leak in the inlet tube.
 

Attachments

  • S2010143.jpg
    S2010143.jpg
    131 KB · Views: 0

fhhuber

Lieutenant
Joined
Jun 19, 2014
Messages
1,365
Leaking fuel = fix or replace it now.

You don't want to be the next guy with a boat on fire.

Since you're not using the VRO... get the pump(s) for the non-VRO version of the engine. (not sure if the 70 uses 1 or 2... probably 1)

And a leaking pump can result in inadequate fuel to the carb giving your symptoms. So fixing the fuel supply might fix the engine.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
When you say ---" would not even turn over " ----What do you mean ?------No start or starter would not turn the flywheel ?
 

redslayer1121

Cadet
Thread starter
Joined
Mar 28, 2016
Messages
12
The starter would turn that flywheel but it wouldn't ever start. I would try to start but never would.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
so spinning but not starting. Wouldn't hurt to check for spark with a spark tester to rule out ignition issues, just for grins.

guessing your motor is an '86 or newer, based on the configuration of the t.stat cover. Post a model number. Depending on what's broken and leaking, would work on the assumption that the pump could be repaired. The fuel hose elbow, for example, is available.
 

redslayer1121

Cadet
Thread starter
Joined
Mar 28, 2016
Messages
12
No Title
 

Attachments

  • photo240514.jpeg
    photo240514.jpeg
    289.5 KB · Views: 0
  • photo240515.jpeg
    photo240515.jpeg
    273.9 KB · Views: 0
  • photo240516.jpeg
    photo240516.jpeg
    278.7 KB · Views: 0
Top