Hello, this is the first boat I have ever purchased its in decent condition. It came with an 1983 50 HP Evinrude that i had already purchased and reinstalled a new wiring harness that i got(was an absolute need since the old was completely rotted). Side note boat has not been started in 8 years but did start 8 years ago, the owner was an elderly man who could not get in it anymore. Bought a new battery whole nine yards. when i turn the key didnt crank at first but does now beautifully but wont start. Checked to see if its getting a spark and gas and it is. Also bought new sparks before i even tried starting it. The only concern i have with the wire harness i bought is that all but two wires are the same color. i didnt take out the old one until until i had the new one but where there used to be a black wire i replaced with the gray wire that was on the harness and what seemed to be a white wire (honestly cannot tell with the color is) is now replaced with a red wire. If i switch the wires is there a possibility it could damage the motor and i just took a lucky guess the first time? The website i got the wiring from said it was part of the ignition. If you look at the link its the exploded view of the ignition system. i replaced #34 (its the entire piece). Would greatly appreciate any help or advice thank you!
Last edited by a moderator: