1981 johnson 70 hp lower unit swap

brandon0133

Recruit
Thread starter
Joined
Jun 30, 2017
Messages
3
I have a 73 or 74 model evinrude Trump 65 HP with a good lower unit. I I have a 1981 Johnson 70 with a bad lower. I removed them and put the evinrude lower on my Johnson. Are the gear ratios the same? Noticed the shift rod was different inside but everything fit together
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
A 1978-1988 lower unit will be a direct swap. I believe to make the 65 hp lower unit you will need all the linkages off of the 65 powerhead.
 

brandon0133

Recruit
Thread starter
Joined
Jun 30, 2017
Messages
3
It all bolted up. Just really wondered about the gear ratio. I think it's the same. I have the whole motor so if I need something from the evinrude I got it
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The 73 model shifts to forward with a DOWN motion of the shift rod.-----The 81 model shifts to forward with an UP motion of the shift rod.----You will have to change linkages on the motor to make it work.----Gears are the same.
 

brandon0133

Recruit
Thread starter
Joined
Jun 30, 2017
Messages
3
It pulls up and pushes down to go in gear just like the Johnson. Arm looks the same on the motor to. So not sure what you mean
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
It means that in 1973 the OMC lower units shifted the exact opposite of the newer models. On the 1973 model to shift into forward the rod moves down for forward. On your 1981 model the lower unit shifts up for the forward gear. On the powerhead of the 1973 model are the adapter linkages so that when you shift into forward you go forward. Without those linkages forward will be reverse for the 1973 unit.
 
Top