1980s Johnson 55hp throttle problems

Ryanlarson07

Recruit
Thread starter
Joined
May 26, 2016
Messages
3
I was out fishing today I started up my Johnson 55 hp motor and let it warm up. I then drove to my destignated are and put the anchor down. Well I shut the Motor off in neutral when i was done fishing I must of hit the throttle to go forward while I was fishing. Anyway when I tried to put it back into neutral it wouldn't go the lever would stop right before neutral. Anybody know what could cause this? Thanks for the help
 

NicoPags

Petty Officer 1st Class
Joined
Mar 24, 2014
Messages
217
Probably bumped it in gear again somehow. Or it didn't fully shift to neutral as thought. Shifting with motor off you should try to turn the prop as you shift. Kind of hard when in the water
 

Ryanlarson07

Recruit
Thread starter
Joined
May 26, 2016
Messages
3
Probably bumped it in gear again somehow. Or it didn't fully shift to neutral as thought. Shifting with motor off you should try to turn the prop as you shift. Kind of hard when in the water


That didn't work now it seems to be stuck in neutral I took the throttle cable off they brittle on the motor and I can manually shift it but the lever on he command center still stops right before neutral. Is it something in the command center
 
Last edited:

interalian

Commander
Joined
Jul 23, 2009
Messages
2,105
What's the model number? There's a shift interlock in the remote control and it may be broken.
 

Ryanlarson07

Recruit
Thread starter
Joined
May 26, 2016
Messages
3
What's the model number? There's a shift interlock in the remote control and it may be broken.

I opened up the control box didn't quite find what the problem was but my neighbor came over and helped me out he was a boat mechanic. Turned out there was a screw that came loose and was sticking out far enough to prevent the throttle lever on moving. Got that fixed and runs fine now. Odd how such little things can cause such a big problem!
 
Top