1976 Johnson 35hp basic lower unit problem. Cable linkage not loosening

bill_bixby

Cadet
Thread starter
Joined
Nov 12, 2016
Messages
15
The notches on the rods have to line up with the holes in the coupler before bolts are put in.------If on a budget you make a piece of 5/16" plate to go behind it with 2 holes threaded..


Question. Is the lower shift rod supposed to be all the way threaded in snug, or leave a couple turns of play for fine tuning? Thanks.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
All the way in.-----Lots of those connecters available used.---If you could walk over one is yours $5.00 is all.
 
Top