1976 Evinrude 4hp 2-stroke under-performing

Theescape22

Recruit
Thread starter
Joined
Aug 5, 2017
Messages
2
Hello,
I recently purchased the above mentioned outboard (model 4636M), which seems to be lacking power. I had a hunch of this and it was really apparent last weekend when I experienced a boater's nightmare: a similar boat/motor blew past me at what seemed to be double my speed!

My setup: 8.5' inflatable (Zodiac knock-off brand), removable aluminum floor panels, 100 pounds, rated for up to 8hp. If I had to guess I would say my top speed is 4 mph. Definitely no planing or wake behind (which I don't mind).

Them: Similar 8.5' inflatable, air cushion flooring, 75 pounds, guessing that it's either rated for up to 6 or 8hp. Honda 4hp 2-stroke which looks newer than mine.

I know I could just get a larger outboard, but outboard weight is a limiting factor for storage reasons (mine is only 35 lbs).

I was thinking maybe something is up with the air intake or the type of prop. I am willing to do my own homework, if someone could please point me in the right direction.

Thanks!
Mark
 
Last edited:

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Not an expert, but I'd start with a compression test, and an open air spark test.. Not sure the gap the spark should jump on that engine though..,
​At least do a compression test and report the results here and I'm sure you'll get the help you need!

For what it's worth...
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
^^^^ Agree. Make sure it is running on both cylinders. My 1978 4hp will push my heavy old runaboat at almost 4mph. And it can plane my 12 foot aluminum on calm water with weight carefully placed. EDIT Just to add your prop is either a 2 blade plastic prop for the weedless gearcase or a 3 blade plastic prop for the standard gearcase. By your model number I think it is a weedless gearcase with a 2 blade plastic prop. I have never seen any other prop for that motor unless maybe an earlier model prop can be used.
 
Last edited:

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
If starting and running smoothly, sort of is what it is. You might try tweaking the carb air/fuel mix a bit. Might be running a little rich.
 

Theescape22

Recruit
Thread starter
Joined
Aug 5, 2017
Messages
2
Thanks everyone. It does start and seems to run smoothly and sounds even (like a purr noise). It has a three blade plastic prop.

I just bought new spark plugs that are definitely the right kind and a fuel solution to clear the reed valves. I'll report back after I have the chance to test it.

ZAA==
 
Last edited:
Top