1975 Formula 233 CC project

makokeith

Cadet
Joined
Dec 18, 2010
Messages
6
Adopted this project boat for free. The cap comes from a different boat as well as an 04 built 114 gallon fuel tank. Boat is solid and in great shape except for the stringers by the fuel tank. Also the transom while not having rotted wood has delaminated. Looks like it used to have dual outdrives, and then switched to single. So much underdeck space being wasted on this boat. I have tons of ideas. But the first steps are pull the deck and then fix the transom and stringers. Also need to recore the cap but that may sit on the shelf as I may do some mods to the bow area. Right now the plan is to bracket the boat and move my 150 etecs from the mako over. I am thinking a dog house on the console and a big in deck livewell. I will close in the transom area for a big above deck fishbox.

PIC_0003.jpg


PIC_0004.jpg


PIC_0006.jpg


PIC_0005.jpg


PIC_0002.jpg


PIC_0001.jpg


Had a bunch of other pics but I was using a new camera and somehow lost them on the software install.
 

makokeith

Cadet
Joined
Dec 18, 2010
Messages
6
Re: 1975 Formula 233 CC project

Deck is out. Foam next. There is some water against the hull trapped in the foam. Dont like the stringer layout since it does not allow for in deck fish boxes like my Mako. The stringers are solid as a rock except for where the fuel tank was. Don't really want to start changing things around. Maybe I will go with all above deck boxes. A nice coffin in front of the console. A box on the transom. Still want the livewell below deck though.

100_0001.jpg


100_0002.jpg


100_0003.jpg


100_0004.jpg


100_0005.jpg


100_0006.jpg
 

ezmobee

Supreme Mariner
Joined
Mar 26, 2007
Messages
23,767
Re: 1975 Formula 233 CC project

Nice looking and stout hull. Will be sweet with twin bracketed outboards.
 

makokeith

Cadet
Joined
Dec 18, 2010
Messages
6
Re: 1975 Formula 233 CC project

Foam is out. Bulkheads and inner transom skin also gone. 15 large bags of foam total. All stringers have rot in areas and are going to be removed. I am going to do a foam filled grid type stringer system. This will let me design the indeck boxes the way I want. Right now the plan is to get the wood in the transom out tommorrow and get her covered for the rest of the winter. Here is a shot of the center console. It is huge and will get some major changes.



PIC_0002-1.jpg


PIC_0003-1.jpg


PIC_0004-1.jpg


PIC_0005-1.jpg


PIC_0006-1.jpg
 
Joined
Nov 1, 2011
Messages
12
Re: 1975 Formula 233 CC project

I dont know what it is about this style boat that people love to give it away but i got a 233 CL for free it has been a great project boat BOAT CABIN ENTRANCE.jpgBOAT FROM BACK.jpgBOAT IIII.jpg
 
Top