1975 Evinrude 25hp Reference Photos?

64fyermun

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
8
I have rebuilt the carburetor on my 1975 Evinrude 25 hp. I was wondering if anybody had something similar that could send me pictures or some information on how to re-install the carburetor with the proper connections. I have the SELOC Manual, but it doesn't really specify. Also, pictures of the wiring from the armature plate to the plugs would help too. Some of the wires had disconnected and I wanted to make sure that I reconnected them correctly. Any help would be greatly appreciated!
Thanks!
Tee
 

Chrisravosa36

Chief Petty Officer
Joined
Aug 16, 2015
Messages
622
I have rebuilt the carburetor on my 1975 Evinrude 25 hp. I was wondering if anybody had something similar that could send me pictures or some information on how to re-install the carburetor with the proper connections. I have the SELOC Manual, but it doesn't really specify. Also, pictures of the wiring from the armature plate to the plugs would help too. Some of the wires had disconnected and I wanted to make sure that I reconnected them correctly. Any help would be greatly appreciated!
Thanks!
Tee
You can buy a service manual for it, and it should have the images you need in the last few pages, make sure it is a year, hp factory manual.
 

tommarvin

Ensign
Joined
Nov 22, 2015
Messages
999
Free factory service manuals at www boatinfo.no/lib/library.html click your make, find your motor, find your carb.

Did you completely tear apart the carb and clean all openings ,tubes with spray cleaner, then blow air through everything?
And then did you buy a rebuild kit from Iboat.com and rebuild it looking at the service manual for every step, did you adjust the float..

Why you ask, it's not that easy to clean and rebuild a carb correctly. .
 

64fyermun

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
8
Yes sir, I completely tore it apart, cleaned it, and used the rebuild kit from iboat.com. I used the chem dip, rinsed, and blew air through all of the openings. It's amazing where air comes out of those ports compared to where they go in. I also rebuilt by going with the manual, but the references photos don't exactly jive with my carburetor. I will check the link that you posted above. I do have a ace in the hole, the marina in town works on Evinrudes, and the owner stated that I could bring it by and he would take a look if I run into any snags. That will be the last option before throwing the whole thing in the garbage.
Thanks!
Tee
 

AlTn

Commander
Joined
Mar 9, 2010
Messages
2,813
by "completely tore it apart" are you saying you removed all the springs, shafts, plates,linkages, etc?
 

64fyermun

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
8
Yes sir. I removed everything I could. Even the aluminum discs covering the ports. I feel that I have it together correctly, just wanted to look at to make sure.

Thanks
Tee
 

AlTn

Commander
Joined
Mar 9, 2010
Messages
2,813
is yours an electric start, electric choke, or manual start, manual choke?...not certain if your setup is exactly the same, but a youtube video that might help you is ...1972 25 hp. evinrude converted to push button start...it has both the electric choke and manual choke still hooked up...
 

64fyermun

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
8
No, it's all manual. I'll check that video out on Youtube. Thanks!
 
Top