1974 70hp Evinrude running issues

Jrcrmoore

Recruit
Thread starter
Joined
Feb 21, 2016
Messages
5
I am having trouble with my motor. Here is what I have done to try to fix it:

Replaced spark plugs
Replaced ignition coils
Replaced starter solenoid
Replaced voltage rectifier
Replaced fuel lines and filter
Completely cleaned fuel tank
Cleaned carburetors

It will crank over and start, but runs rough and dies after 30 or so seconds. I removed spark plugs and found a milky substance in the bottom cylinder area. It keeps fouling the plugs.

Any ideas what could be wrong?
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Milky substance might mean water in the fuel or more likely the exhaust gaskets on the side of the motor are leaking. Do a compression test and spark test first first to determine the health of the motor.
 

Jrcrmoore

Recruit
Thread starter
Joined
Feb 21, 2016
Messages
5
Spark test is good- there is definitely spark. We just did a compression test. The top two cylinders were reading 140. The bottom cylinder is reading 130.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Could be a problem with the 3 gaskets on the exhaust covers.----Or a hole / crack in the water jacket on the exhaust side of the block.
 
Top