1973 Evinrude 85 Hp

Charleshankins1

Recruit
Thread starter
Joined
Mar 3, 2017
Messages
3
I have a 1973 evinrude 85 hp outboard. This was given to me by a family member. When he put it in storage last year everything ran fine. I'm first trying to find the screw to release the shaft to lower the lower unit to change the impeller. Second of all I'm trying to start it and when I turn the key nothing happens. Battery is charged and I'm assuming nothing else has been touched. Third would like to know where to find the fuse. Any help would be greatly appreciated
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Starboard side.---There is a bolt with a 5/8" head that needs to be loosened.------It is at the front of the intake manifold / near bottom carburetor.-----This allows you to spread those 2 arms to release the shift rod.----Fuse is found in the wee rubber plug in the wiring harness on the motor.-------Fuse is 20 amp and about 5/8" long.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
No that bolt with the 5/8" head on it is easy to get to.-----Open end wrench is all that is requiured.
 
Top