1973 50hp Evinrude outboard won't shut off

couch702

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
18
First I want to say hello to everyone, and I'm new to boat boating and this forum so please bear with me as I learn.

I am currently working out some kinks on my 1973 Evinrude 50hp that runs great. Sometimes I have problems with it starting up, sometimes I don't, but the biggest problem I have is that I can't get the motor to shut off with the ignition switch. I have already changed the ignition switch, but that didn't accomplish anything. So any help to point me in the right direction would be great.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Remove the cover plate from the power pack. Now identify the screw terminal that holds the black with yellow stripe wire. With the motor running, use a piece of insulated wire to touch one end to that black/yellow terminal and other end to ground. Motor should stop. If it does, there is a fault somewhere in the black/yellow wire between there and the key switch, OR the switch itself, OR the ground return (black wire) from control back to motor.

If shorting the terminal to ground did not stop the motor, power pack is bad. (Unlikely. but possible).

Warning: Be sure to use an insulated wire to do the short to ground test, and do not touch the wire end. It will shock you.
 

couch702

Cadet
Thread starter
Joined
Jan 23, 2016
Messages
18
OK we got it fixed! Thanks for pointing me in the right direction. There was no power at the harness plug from the black and yellow wire. So I cut the wire from the plug and I had power. So the problem is in the plug. Rewired the plug and problem is gone! Thanks F_R.
 
Top