1972/125hp Johnson

0sprey

Cadet
Thread starter
Joined
Jun 22, 2014
Messages
7
Pistons measure 3.476, bore measures 3.515. Are these the standard pistons? What should be the difference between bore diameter and piston diameter? Bores need honing and #4 may need a rebore. #1,3 pistons have been replaced previously
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Facts.--------The standard bore for that motor is 3.500" that is straight from the factory sales brochure.--------I believe you are measuring the piston in the wrong place !!--------Pistons are measured at the bottom of the skirt and no other place.--------Perhaps you meant 3.5015" on the bore as well.----Repost what you find.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
That bore is .015" oversize. Standard is 3.500.
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
3.515 is .015 oversize if bore is straight which Johnrude never made as they only had .020 offered. Is this the skirt or dome measurement????
 
Top