1971 evinrude 85hp no spark

Ryancbj22

Recruit
Thread starter
Joined
Jul 11, 2014
Messages
2
Hello I have a 1971 85hp evinrude 85esl71a model motor and the motor ran great last year until the end of the season. I now don't have spark on any cylinders and no spark or power at the coil! I'll let you know now my one weakness with engines is electrical diagnosis. I am getting power from the power pack but was unable to get any reading on direct current coming from the lead strip to the coil. At that point I stopped and was pretty much stumped on where to proceed. It does have a rectifier and clipper ***embly also a lead and diode thing. The motor is in excellent condition except for this problem. I have 130lbs on all four cylinders the carburetor was rebuilt last year. I have replaced everything from the coil on. Electronic eye, cap, rotor, etc. I have on order a new coil and rectifier but am waiting on them to arrive. I only purchased them cause I found them for fairly cheap and figured it couldn't hurt, but I need to find a way to diagnose why I'm not getting spark rather than just keep replacing parts until it works. Any help would be greatly appreciated!!!
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,701
Check for corrosion on the connector going into the Amplifier(4 wires), You said you had voltage on the purple wire going into the amp? Also check the wires between the distributor base and the amp for damage
 
Top