1971 60hp evinrude model # 60173C serial # 56437 won't start..need help

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
Hi all ..newby here i have a 1971 60hp Evinrude.On the boat there is a push button starter on the dash but the wires go no where someone before i got it cut the wires ..what i am wondering is where do i connect the wires to i know the one wire goes to the fuse panel but where does the other wire go ..also do i need it for this motor ..thx
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
12v to one terminal of push button... other terminal of pushbutton goes to small terminal of solenoid.
SOLENOID-WIRING.jpg
 

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
hi thanks joe will give that a go today ...boat is at a friends will get back latter and let you know how it turns out
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
No Title

With all respect, that question is very odd. The electrical system on that motor is much more complex than a single button on the dash.
 

Attachments

  • photo262775.jpg
    photo262775.jpg
    240 KB · Views: 13

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
With all respect, that question is very odd. The electrical system on that motor is much more complex than a single button on the dash.

My thoughts exactly, and I took the question to indicate that either the engine is something else OR that someone had really been re-working the electrical system... hence my graphic reply sticking to the starter solenoid area.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
You have to wonder how some of these motors end up with this issue of wires all cut and messed up.
 

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
hi joe i tried what you said ..now i have no spark at all going to buy a good marine battery ...was useing a deep cell battery that a friend lent me ..saying it would work
 

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
all the wires are on the motor it self ...just every wire from under the dash was cut and the ones that weren't cut were wired right to the battery
 

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
i will try to take the pictures of the motor from my phone and put them up so you could see...
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
all the wires are on the motor it self ...just every wire from under the dash was cut and the ones that weren't cut were wired right to the battery

Okay..... Examine, enlarge, and print out the wiring diagram that F_R provided in post 4 as it is very clear and highly detailed that will help keep you from making any expensive mistakes.
 

shadiezz

Cadet
Thread starter
Joined
Jul 5, 2016
Messages
6
ok will do joe ..thank you ...and thank you also F_R for the Diagram ...and your help too
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Nearly all older boats have a rat's nest of wires under the dash that have nothing to do with the motor. They are for running lights, bilge pump, fish finder, and a host of other accessory goodies. And they rarely make good sense. Many times, I have just stripped the whole mess out and re-wired everything in an orderly fashion.
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Nearly all older boats have a rat's nest of wires under the dash that have nothing to do with the motor. They are for running lights, bilge pump, fish finder, and a host of other accessory goodies. And they rarely make good sense. Many times, I have just stripped the whole mess out and re-wired everything in an orderly fashion.

Amen to that.... The best route to take.
 
Top