1970 85hp Johnson Hydroelectric Shift Outboard no spark

comrad.12357

Cadet
Thread starter
Joined
Jul 8, 2012
Messages
8
Ive recently come by a new engine, and its in great condition, its been a freshwater motor, so corrosion is minimal, but i have been unable to start it. It cranks, but it does not produce spark on any cylinder. The wires have good cotinuity, but it is in gear. Could it being in gear cause the engine to ground out the spark, and if so how can i force the gear to change into neutral?

Thanks in advance!
 

durban

Master Chief Petty Officer
Joined
May 27, 2011
Messages
897
Re: 1970 85hp Johnson Hydroelectric Shift Outboard no spark

in your controls there is a blocking diode where the positive current flows through to the solenoid for the neutral & in turn that positive current goes to distribute tor if that diode is not working nothing will work gear selection & spark test it with a diode tester
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: 1970 85hp Johnson Hydroelectric Shift Outboard no spark

That motor will ALWAYS be in gear if not running. They were made that way on purpose (fail safe mode).

Be careful checking out that ignition system, you can blow something expensive in a nano-second. Best know what you are doing. Do a search here, there should be instructions on checking it out somewhere. I've typed them out enough times.

The blocking diode is for the shift circuit. Has nothing to do with the motor starting. However, if the diode is shorted you can't turn the motor off once running.
 
Top