1968 Evinrude big twin

Shaffer89

Cadet
Thread starter
Joined
Apr 15, 2016
Messages
11
Can anyone tell me what that lower hole is for? I've see pictures of similar motors and they didn't have that lower hole.
 

Attachments

  • photo242309.jpg
    photo242309.jpg
    15.4 KB · Views: 0
  • photo242310.jpg
    photo242310.jpg
    15.7 KB · Views: 0

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,701
Air intake for the hot air automatic choke. There is a heat exchanger inside the exhaust cover, the upper hole has the pipe that goes to the choke housing where the hot air unwinds a bi-metal strip to open the choke
 
Last edited:

Shaffer89

Cadet
Thread starter
Joined
Apr 15, 2016
Messages
11
OK cool, just seeing that my motor had this and a couple other ones I've seen didn't I wasn't sure if it was supposed to be there. Thank you for your help. I don't know much about this motor or outboard motors in general. I understand motors as I've worked on cars my whole life but this is the first outboard I've owned beside trolling motors. Thank you again!
 
Top