1968 65hp Evinrude Outboard Motor

Baloo13

Recruit
Thread starter
Joined
Jul 6, 2003
Messages
1
I Have a 1968 65 hp Evinrude Outboard Motor Model No# 6585 in very good working order, or that was until last weekend. I was going up the river at full throttle and I hit a rock, luckily I had not locked the motor down and she jumped out of the water. I pulled up the motor to look for damages, the prop was a little chewed up but that’s all I could see at that time. After that we ran it for 20min more then when I slowed down turned round tried to accelerate and the motor would no longer go fast at full throttle there was a small rattle in the motor at that time. After I got it home I saw that the lower unit (the Foot) was a little loose and the prop was no more good. <br /><br />Any ideas <br /><br />Paul<br /> :eek:
 

steelespike

Supreme Mariner
Joined
Apr 26, 2002
Messages
19,069
Re: 1968 65hp Evinrude Outboard Motor

Sounds like you need to take apart the gearcase<br /> and repair you obviously damaged the lower unit.
 
Top