1966 100hp elect. shift johnson o/b no signal

Reggie T.

Recruit
Thread starter
Joined
Jul 1, 2003
Messages
3
I had a pinched starter cutoff wire. That burned up my starter coil wires and spark plug wires. I replaced the coil wires and cut off wires. The boat started up. I took the boat to the lake the boat run for awhile(15min.). I tried to take off and the boat died out. I turned the key there was no crank no sound and the battery gauge went straight down to negitive. I tried to start the boat the next day it cranked right up. I need help please!
 

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: 1966 100hp elect. shift johnson o/b no signal

Hey Reggie,<br />I'm not sure what you're calling a "starter cutoff wire" or "starter coil wires" but I do know what sparkplugs wires are. If you could help me out with what these wires are, maybe we can help you out. ;) <br /><br />c/6<br /><br />Hooty
 

Reggie T.

Recruit
Thread starter
Joined
Jul 1, 2003
Messages
3
Re: 1966 100hp elect. shift johnson o/b no signal

Thank you hootie.<br /> <br />Their is a cut off switch next to the distributor cap and the wire runs to the starter sileniod. I also was speaking on the positive and the negitive wires running from the coil that sit above the distributor cap. The negitive coil wire runs to the distributor cap and the positive coil wire runs to the starter sileniod.
 

Reggie T.

Recruit
Thread starter
Joined
Jul 1, 2003
Messages
3
Re: 1966 100hp elect. shift johnson o/b no signal

sorry for the spelling of hooty
 
Top