1965 EVINRUDE sportfour 75hp

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
So I get around 8 volts at the coil with ignition on. The points are new and the condenser as well as the primary coil wire as I ripped the first one. The points is where I have a question: should they close all the way and then at their open position they need to be gapped .020? When they're closed they need to touch?
1. YES
2. Do you have spark from the coil, before the distributor, yes or no?
 
Last edited:

Myomere

Seaman Apprentice
Thread starter
Joined
Apr 27, 2014
Messages
30
Well it's been a while since I updated but after putting in a new vw beetle ignition coil for external resistor and a new battery she fired up. Looks like the coil was grounded out.
 
Top