1964 Evinrude 90s carb rebuild

Garltorhunter1313

Recruit
Thread starter
Joined
Oct 7, 2015
Messages
4
I have a 1964 Evinrude starlit 90s, model number 90493s. It has been sitting a couple years in a shop in wisconsin. I'm looking for a carb rebuild kit for it and I'm having no luck. I'm about to drain the lower unit and check it out. I'll also need an impeller when I start that part of my project. After that I also need plug wires. Anyone know where I can get parts?
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
First things first Garitorhunter1313 :welcome: to :iboats:

Your engine is on the older side but you still may be able to locate parts and kits for it. Go to boats dot net, and select their Johnson engine type and then the 1968 model engine in your engine's HP range. Then look at the break down of the carb and see how that compares to your carb. If they are alike or similar, then that same carb part/kits could work as well. 1998 is as far back as they show engine parts, but lots of times they used the same parts from one year to another. And maybe they still used your '64 type carb in '68 as well. You can do the same with the water impellor as well. Just a thought...
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
0377992 is the impeller number looks like the carb parts are available but will have to be bought individually. Depending where you are in Wi you need to find a dealership that still has the microfiche. Looks like a lot of the maintenance parts are available. If you PM me I can help you out more.​
 

Garltorhunter1313

Recruit
Thread starter
Joined
Oct 7, 2015
Messages
4
I have gone through so many parts schematics for other boats and can't find anything. I got the boat to run just by cleaning the carbs and i did find spark plug wires. I can't find a coil wire anywhere. I can find the ends but making one is a pain to get it right. the needles are still going to need to be replaced. and digging more into it I'm finding out the wiring is drying out and falling apart from sitting so long.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Sierra sells the coil wire should be able to get it from napa. Go to marineengine.com the parts fiche goes back to 1955 that's where i found the impeller number. They have the whole breakdown for your motor and parts.
 
Top