1963 40 HP Johnson Throttle Spring Hookup

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
No Title

This is not my motor but I think this might help.
 

Attachments

  • photo248440.jpg
    photo248440.jpg
    73 KB · Views: 0
  • photo248441.jpg
    photo248441.jpg
    144.6 KB · Views: 0
Last edited:

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Sorry the photos are not close ups. But it looks like the one end is in the right hole. And the other end with the red arrow in your photo clips over the pin that is in the center of the slot. The coiled part of the spring faces towards the rear of the motor. Hope this helps or somebody may have better photo for you.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
....if the other poster Dborun has it right (think he does). Thanks, hardwater. Seems to be a flood of posts on that linkage.
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Yes he never said if it was ok or not. I dont have that exact model, but the three motors I have with a similar setup look like that.
 

Vampy

Recruit
Thread starter
Joined
Jul 17, 2016
Messages
3
Thanks so much for the quick responses I will have him take a look
 

Vampy

Recruit
Thread starter
Joined
Jul 17, 2016
Messages
3
This is a photo from the post oldboat1 was talking about.

He used this photo to attach it back on. He asked me to thank you and the rest of everyone who took their time to respond. He said he never thought about hooking it back on to itself that way. You guys are the best! :)
 
Top