1959 johnson 35 seahorse shifting issue

Myersjames42

Recruit
Thread starter
Joined
Sep 6, 2017
Messages
2
I bought an old 1959 johnson 35hp outboard and have finally got it running. I took it out on the water and shifted into gear. It went good for about 3 minutes, then kicked out of gear. I disconnected control box and shift it by hand. Same thing. I tried revving it up in gear hoping it would stay in gear but when I did, the shift lever started jumping back and forth and the motor jumped from forward to reverse! What the heck is going on???? Any help would be appreciated. Would like to get out on the water before snow falls!!! Thank you
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Bad clutch dog and/or forward gear. You need to take the lower unit apart.
 

Myersjames42

Recruit
Thread starter
Joined
Sep 6, 2017
Messages
2
Thank you for the quick response! Was hoping to avoid that. Was praying for easy fix. Guess I know what I'll be doing this weekend. The clutch dog would cause the shift lever to bounce back and forth? Almost seems like the linkage is broken somewhere...to allow the dog to just roam freely?
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Well, any additional history? Prior lower unit work? Phillips screw removed/replaced when draining and changing gearcase oil?
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
When the dog and gear are worn sufficiently it will come out of gear so forcefully you can't even hold it in by hand. Ain't no way the linkage can hold it. In fact, it will beat the linkage to death if you let it continue. Could already have happened.
 
Top