1957 sportwin help.

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
I have read a lot of the older posts here, but still in the dark on a few items.. Maybe you guys can help...
I bought the motor and tank, replaced the coils, plugs, leads, points.
Had the carb rebuilt because of poor running on the top end.
Now that I have it back, it still seems down on power on the top end. I went thru all the adjustment procedures as described here..
So.. I am at a loss now. The plugs look to me to be lean. The motor seems to be starving for fuel.. has surging going down the water. So if anyone can lend a hand, that would be great....
 

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
How is your pressure tank line? No leaks? Connector in good shape? O rings don't leak?
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Okay. So the Owings are bad on the connector. So, until that is fixed, I made a couplereservation out of copper - to join the lines together. The line is old, but I cut away all the bad line. (Someone had about 11 feet of it...)
I wondered if might be sucking air on the top.end. my next plan is to get new line... just don't want to keep piling money in on this...
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Notorious reason for them running lean---partially clogged fuel filter on bottom on carburetor. They may look fine, but restrict the fuel flow. As a temporary test, remove the filter and see how it runs.
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
O! That's great... I will.look into that.
Now you are meaning the air box correct?
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Ok, maybe im not looking at it correctly. There is no fuel filter unless it an internal inline..
So, i will hunt further...
 

lindy46

Captain
Joined
Nov 27, 2008
Messages
3,886
There should be a glass sediment bowl on the bottom of the carb. The filter is in there.
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Ok, well i pulled it (glass bowl) off and emptied it..
I will look into it deeper...
Thanks!!!
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Well, last night i pullled the bowl off. There is a threaded brass piece that goes into the base of the carb, (fits inside the the bowl) hope it makes sense.
I unscrewed it and a sleeve came out.
There was not a filter per say tho...
There was a lot of trash in the bowl, plus i removed the the high speed jet and flushed the port with carb cleaner.
I also removed the small screw opposite side of the fuel line side directly under the high speed jet. Had some trash come out of there..
So i hope my tank is dirty and that this is my main issue. I'm going to try to make an inline filter to hopefully help with the trash issue. Recheck my points, although i feel it is a fuel issue...
Would a fuel mixture that is "oil" lean cause power to fall off ... i cant imagine it would but........??
Thanks....
 

pro-crastinator

Chief Petty Officer
Joined
Dec 12, 2013
Messages
453
SOunds to me like the filter that was originally in the glass bowl is not there anymore.
I also think the fuel tank is a prime (co) suspect.(connectors leaky, clogged pick up, etc..)
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Sounds like you need to remove the carb, disassemble, and thoroughly clean it. Removing plugs and spraying stuff won't cut it.
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Yep, i just had a gent rebuild ot for me....(time and skill)
I'm learning slowly tho....
It runs so much better since....but it seems that the longer it runs the worse it gets...
So.. i think it has trash in the tank again...
So back to the fuel thought.....i
Will keep you updated about it...
Thanks for all the tips amd pointers...
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Ok, so tonight we went out. I put a new fuel line with inline filter on the motor and tank.
We did pretty good after getting the high speed set. Still has a miss, but runs better...still wants to surge like its about to hit on both cylinders. So, i take one lead off at a time. The top cylinder runs great when its the only cylinder engaged. The bottom one barely runs by itself. And the plug is cleaner than the top. (Not as much soot)

So im going to check the points again to see how they look.
Qiestion tho. In reverse, the motor will rev to the moon.....
 

Evilvic

Cadet
Thread starter
Joined
May 28, 2016
Messages
10
Fixed the problem and she runs like a top now!
The points gap had closed up on one cylinder somewhere along the way.
She runs like a champ!!
Thanks for all the help and pointers!!
 
Top