1957 evinrude 18hp outboard

Sudshunter

Recruit
Thread starter
Joined
Aug 14, 2016
Messages
2
I would like to start off by saying hello to everyone as i'm new to this site. We were given a 1957 18hp evinrude outboard. the only numbers I see are on a plate attached to motor and they are: 15020-29109 we have been trying to get it started,first we had to replace fuel lines and now we have fuel everywhere it needs to be, now we are getting no spark tried replacing plugs no luck. we have ordered a manual for it but don't have it yet and we cannot find anything online. Any help you can offer would be deeply appreciated....
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
15020 is the model number (1957), and 29109 is the serial number. You can be certain that it needs new ignition coils unless they already have been replaced. ALL 1957 Evinrudes do. You will also want to check the points and condensers while you are in there. Wait for the manual. You need the instructions for proper removal and replacement of the flywheel.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Do a compression check on it. If that's ok do the water pump
 
Top