1956 or newerish johnson 15 hp cooling problem?

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
It kinda does, let me go check and ill add more if needed. Im going to be trying the 15 out on the lake tomorrow to see if it all works or not for sure. If i dont see water at all im gonna shut it down and try to replace the impeller myself. Or the whole pump. Ill let you know!
 

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
So i checked my oil bottle. I had about 15 ounces in it. I went to add more and i have about 23 or 24 ounces now. Hopefully thats not bad
 

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Yeah, if you put a total of 23 to 24 oz of oil in 4 US gallons, then you have approx. between 21:1 and 22:1
​Might be a bit smokey, but you have enough lubrication anyway... LOL
 

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Yes... If the engine calls for 24:1, then running 40:1 wasn't giving enough lubrication and you could damage the bearings etc...
Not good.
 

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
Okay so i took the 15 out yetsterday. Ran good but would flood out so i cleaned the carb and float. Found that the gas lines were shot. Now it runs way better but it feels like its running at half speed. I feel like i added too much oil. Would that be the reason? I adjusted the bottom jet to 1 and a half turns out cause thats the only get i removed. (Carb was clean except float bowl and sediment bowl) it still moves good but its not how it was running with a stuck float lol
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Do you have spark on both cylinders. If your motor has the original coils they will need replacing.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
In the first place, the 7.5 is supposed to get 16:1 mix. That is 1/2 pint of oil to each gallon of gas. It originally came with a 4 gallon tank and you were supposed to use a quart of oil for a tank of gas. You say it locked up on 40:1 or 50:1 or whatever?? Well.......
 

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
I will have to check. I know the plugs looked bad so i put different plugs in. One of the new plugs could have been bad as they came with the motor. Ill check and let you know about the spark. And im not sure about the cloils. The plug wires looked fairly new. As for the 7.5 my dad mixed it for 40:1 cause thats what my neighbor said he ran it on
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
I understand. There is what the neighbor says, and what the manufacturer said. It's your call.
 

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
I got it unstuck lol. It was my first boat motor so i followed what he said. Now that i know the actual mix is that's what im gonna run if i ever get it going again.
 

Renegade56

Cadet
Thread starter
Joined
Jun 4, 2017
Messages
19
15 has spark on both cylinders carbon on both as they went in clean. I feel like either too mich oil or the floats still stuck causing it to flood out. May have to put a new float in. I tried messing with the jets when out on the lake and it doesnt seem to help any
 
Top