1956 Evinrude Fastwin 15 remote throttle

Maydolf

Recruit
Thread starter
Joined
May 18, 2017
Messages
1
Hello,

I have a 1956 Evinrude Fastwin 15 model number 15016. It currently has a tiller but has pulley system remote steering. Although I could turn around to adjust throttle, I see that getting annoying and possibly dangerous.

I have read several other discussions here about this but I need more clarification. I just want cheap throttle controls, I dont even really need the separate cable for shifting as I sit right in front of the motor. Are there specific types of throttle controls that work with this motor, or anything particular I should be concerned with? Is this something fairly easy to do on these little motors? First time with remote controls so thanks in advance.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Simplex units (two handles) -- readily available unless you are looking for a '56/'57 vintage (tougher, but can still be done). Get a sense of cable length needed, and look for something with cables (evinrude/johnson ends).
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Not 1956 vintage, but without doubt, this is the best control for your motor (not my ad). They come with various graphics.
http://www.ebay.com/itm/Evinrude-Joh...tZEjBo&vxp=mtr
It is best to get one complete with cables, even if they are no good or the wrong length. Reason: You need all the pieces on the ends of the cables (not included with new cables)

EDIT: My bad, I should have suggested, iboats sells controls. http://www.iboats.com/Uflex-Side-Mo...84818245--session_id.074186899--view_id.49380
 
Last edited:
Top