1955 evinrude aqua sonic converted to electric

Franny80

Recruit
Thread starter
Joined
Apr 25, 2016
Messages
2
I boat a used boat that has a 1955 (7518) motor on it that has been converted to an electric motor with a 36 volt golf cart motor on it. I relubricated the drive gears, and took the prop off to unwind fishing line. There is a tiny bit of play in the drive shaft for the prop....is this normal? I believe there is a shear pin in the prop that is broken but then a cotter pin at the end as well. Does anyone know the size of the shear pin or part number? Also I have found a replacement prop part number but could I change to a three blade and any suggestions for one that would work? Thanks in advamce
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
No Title

All bets are off after a conversion like that. However, for whatever it is worth, here are the part numbers
 

Attachments

  • photo242528.jpg
    photo242528.jpg
    239.9 KB · Views: 0

Franny80

Recruit
Thread starter
Joined
Apr 25, 2016
Messages
2
Thank you. The motor works pretty well actually and I will take a picture. I the only conversion is on the top part of the motor.
 
Top