1952 Johnson Model RD-13

tazkim73

Recruit
Thread starter
Joined
Oct 11, 2017
Messages
2
Hi, new to IBoats... I have a 1952 Johnson, Model RD-13, Serial 958746. Was my dads... I am trying to find a New home for it. Any suggestions on how to find a buyer or @ what its worth?
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Where are you located? Your best bet is to take it to a local meet of the Antique Outboard Motor Club. Go to their website to see where they are. www.aomci.org
It probably is worth less than you think. Value varies a lot according to condition and location. Going out on a limb, I'd say $100 tops, in non-restored condition. But you see them listed on e-bay for 5 times that much. Probably never sell though.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
That would be the Motorheads Chapter. You just missed their Oct 7 meet.
EDIT: Oops, wrong chapter. You might be more interested in the M.O.B. chapter in Indiana. https://www.michianaoutboardboating.org/
 
Last edited:

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Agreed, if it's absolutely mint, a real survivor, then it might draw a few hundred, but the truth is, Johnson made a lot of those 25s over several years. The number of people who really want one is far less than the number of motors available to be had, which keeps prices down. Someone buying it with the thought of tuning it up, getting it running, and maybe restoring it doesn't want to spend a ton up front, knowing they'll be putting a few hundred into it to get it going again. Having the original "tall boy" pressure tank is a plus, too.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Worth very little since most shops will not work on them.----Not only that the labour rates today quickly put the cost of a tune-up / routine work to well over $500.-----Cost money to take the cowling off and to put it back on too.----People who know how to fix these motors often get them for free or for a case of suds.
 
Top