1952-53 7.5 fleetwin parts help

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
I recently acquired an old fleetwin that I am trying to restore. It runs but could use some new parts such as coils, carb rebuild, new gaskets and some other parts I will probably never find like mounting shock #277080. It seems like every site I go to their parts list only go back to 1954. I believe this is the year they redesigned the fleetwin. I can find the coils but I am having a tough time finding any gaskets, seals, or carb parts. Any help would be appreciated.
 

1946Zephyr

Vice Admiral
Joined
Oct 21, 2008
Messages
5,556
I would try Sea-Way Marine, in Seattle or Engine Blade and Prop. You might also go to the AOMCI website and post an ad on the Webvertize
 

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
I made some headway on the carb kit learning that it is a tillstons 34 b carb. This might be a dumb question but does the engine have a name or make, or is it just an Evinrude 7.5? Thanks for the parts list. I have called the dealer ship with out parts numbers and after a long silence the man behind the phone laughed a bit and said goodbye. I was thinking about posting on AOMCI but I would really like to place a bulk order from one place for all the parts I need. The more research I do I am realizing that might be unrealistic.
 

pro-crastinator

Chief Petty Officer
Joined
Dec 12, 2013
Messages
453
Don't lose hope. Don't get discouraged. Be methodical.
Parts are available for darn near anything you need.
I ought to know, I was standing in your shoes two years ago.

Perseverance is the watch word.
Good luck.
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
I made some headway on the carb kit learning that it is a tillstons 34 b carb. This might be a dumb question but does the engine have a name or make, or is it just an Evinrude 7.5? Thanks for the parts list. I have called the dealer ship with out parts numbers and after a long silence the man behind the phone laughed a bit and said goodbye. I was thinking about posting on AOMCI but I would really like to place a bulk order from one place for all the parts I need. The more research I do I am realizing that might be unrealistic.

On the first page of the parts list provided it says Evinrude Fleetwin.
 

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
I know that Evinrude is affiliated with Johnson and OMC. I be leave OMC makes motors for many other company's. So, was hoping I could broaden my search if I knew that engine was made by OMC or Johnson. I know very little about outboard engines. What I do know I have learned in the last week. So It may have been a silly question.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
You might enjoy Peter Hunn's Old Outboard Book (might have see it referenced on the AOMCI site) -- excellent for both overview and detail. (Hint: A Goodyear is not necessarily a tire.)
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Evinrude, Johnson, and Gale Products were the three outboard divisions of OMC. In many cases, there were similar motors that crossed over the brand names line. But that is not true on your early Evinrude Fleetwin. Johnson and Gale did not have their versions of that one. So, it is strictly Evinrude. Well except for the OMC Universal Magneto that was used on tons of different motors.
 

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
You might enjoy Peter Hunn's Old Outboard Book
I think you are right. After taking off the carb tonight and discovering metal shavings where the reed screws fit into the carb, I might need all the knowledge I can get.
 

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
Evinrude, Johnson, and Gale Products were the three outboard divisions of OMC. In many cases, there were similar motors that crossed over the brand names line. But that is not true on your early Evinrude Fleetwin. Johnson and Gale did not have their versions of that one. So, it is strictly Evinrude. Well except for the OMC Universal Magneto that was used on tons of different motors.
Thank you for clearing that up. Thank you to everybody for their advice. I think I'm going to take a step back, buy Peter Hunns book, maybe a service manual and come back at it with more of an understanding of the motor.
 

TN-25

Chief Petty Officer
Joined
May 27, 2008
Messages
627
The 7.5 Fleetwin was introduced for 1950, replacing 2 different tiny four cylinder models (5.4 & 9.7 horse). The 7.5 had a neutral hub & needs to be spun around for reverse. They also used the Tillitson carb which is harder to find parts for. They continued like that through 1953. For 1954 Evinrude took the existing 7.5 powerhead and dropped it onto a new midsection & lower unit that was shared with Johnson's new 5?. They now featured a shiftable lower unit with superior vibration isolation and I also believe a new carb make that you can still get parts for. By 1956 the 7.5 was shared with Johnson. The last year for that powerhead was 1958.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Most gaskets can be made with a hole punch set and some small sewing scissors. Save the old gaskets as best you can for templates. You'd be surprised what you can find in the plumbing aisle, too, as far as o-rings go. Seals can be sourced easily through a supply house like Kaman Bearing. With 60+ year old motors, you must be able to improvise. Not saying you won't get lucky and find a place that has everything, but be prepared to work with what you can find...
 

Lunchquest320

Cadet
Thread starter
Joined
Apr 25, 2016
Messages
6
I think you are right Chinewalker. I am making my own gaskets. My question is what kind of gasket material would you use for the carb bowl? I have been using the fiber material for the powerhead. Would that work? Also, is there a special marine grease I should use for the lower unit?
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Use 80-90 weight outboard gear oil. If it leaks out, fix the seals. Do not use grease.
 
Top